Hardwood Restoring

Remove scratches and small dents by adding a fresh layer of protective finish years after your original finishing.

Hardwood Restore

Carter Quality Hardwood Restoring - Expert Craftsmanship

SERVICE OVERVIEW

After a few years that once beautiful hardwood floor starts to lose its luster. There are little blemishes and scratches everywhere and it doesn’t shine like it used to. Don’t worry! Carter Quality Hardwood Restoring process can give your tired floors an espresso shot and bring them back to life. Check out the process below!

THE PROCESS

b

The Estimate

Estimate the cost of the project based on options chosen during the sales consultation

Deposit & Schedule

When you choose us for your project, we will require a small deposit, then we’ll get your project on the schedule

Top coat Abrasion

We will clean and buff the floor in order to abrade the top coat of finish. This allows the new coat to adhere properly.

Finishing

Our experts will lay down a fresh coat of finish, filling in surface blemishes and protecting your floor for years to come.

Popular Questions

WILL THE BUFFING PROCESS CREATE A LOT OF DUST?

Less than you would think. With our high-powered vacuum systems we can create a dust-less experience.

Our teams will always take dust mitigation steps on every project. 

WHAT TYPE OF FINISH SHOULD I CHOOSE?

That depends on a lot of factors. The main determinants are your desired finish base, sheen level, and desired cure timeframe.

Finish Base

We use either Water-based finishes or Oil-based finishes. Most floors are finished with a Water-based finish, but Oil-based can be appropriate.

Water and Oil-based finishes differ in two ways; hardness and aged color. Water-based finishes tend to be harder than oil-based. Water-based finishes do not affect the color of the floor over time. Oil-based finishes yellow over time, which can impact the color of your floor depending on its original color.

Sheen Levels

Sheen levels range from Matte (no sheen) to High Gloss (very high sheen). We recommend using Satin (low sheen). Semi-Gloss (medium sheen) can be used but it isn’t as popular.

Desired Cure Timeframe

Curing timeframes vary widely from finish type to finish type. For example, UV Water-based finishes cure instantly, while regular Water-based finishes take up to 4 days to fully cure.

UV cured finish is cured the second we run our high-powered UV lights over it. This allows you to get back on your floors and back to normal life sooner.

Normal Water-based finish takes 1 day to cure 75%, allowing you to resume normal traffic. It takes additional 3 days to cure the rest of the way. Rugs and furniture can be moved back at this point. All furniture not on rugs should have felt pads applied.

Oil-based finish takes roughly 30 days to fully cure. Need we say more.

DO YOU HAVE A SHOWROOM?

Not yet! The good news is we come to you!

Right now, we only have a warehouse location.

We Are Carter Quality Hardwood Flooring

We have worked on all types of hardwood floors, all over Southeast Michigan.

  • Carter Quality Hardwood Flooring
  • Carter Quality Hardwood Flooring, Inc. is family-owned and operated; located in Oxford, MI. We specialize in hardwood installation and restoration. We do not have a showroom. We come to you!
  • 947 S. Glaspie Rd.
    Oxford, MI 48371
  • admin@carterquality.com
  • (248) 628-0990
  • www.carterqualityflooring.com

Open Hours:
Mon–Fri: 9:00am–5:00pm

We do not have a showroom.
We come to you!

HARDWOOD FLOORING INSTALLATION & RESTORATION SPECIALISTS
CALL (248) 628-0990

We can help with all of your questions! How much does it cost to clean my floor? How long does it take to refinish?